Mitsubishi Electric MELSEC iQ-R-R6SFM - Group Setting for Refresh

1 RUNNING A PROGRAM
1.5 Program Execution Type
65
1
Group setting for refresh
Refresh can be performed when a specified program is executed
*1
by setting a group number to each program and specifying
the number for each module.
*1 Input refresh (load of analog input, Input (X)) is performed before execution of a program, and output refresh (analog output, Output (Y))
is performed after execution of a program.
Refresh group setting
A group number is set to each program.
[CPU Parameter]  [Program Setting]  [Program Setting]  [Detailed Setting]
Window
Displayed items
When the specified group number is not set in the refresh settings of each module, the program is executed,
but the refresh of the relevant group number is not executed.
Refresh setting of each module
Select "At the execution time of specified program" in "Refresh Setting" of each module, and type the group number of the
program to be refreshed.
[Module Parameter]  [Refresh Setting]
Window
(Example: The "Refresh Setting" window for an I/O module)
For refresh of each module, refer to the manual for the module used.
Item Description Setting range Default
Refresh Group Setting Sets the group number of each program which is specified for each
module.
• (Do not Set)
• Groups [1] to [64]
(Do not Set)