Mitsubishi Electric MELSEC iQ-R-R6SFM - System Consistency Check

28 FUNCTIONS
28.5 System Consistency Check
475
28
28.5 System Consistency Check
This function checks whether the system configurations and files in the CPU modules are the same between the control
system and the standby system when the redundant system is in backup mode.
The following table lists the items to be checked in the system consistency check.
No. Item Description Reference
(1) File Parameter file, program file, and other files Page 477 File
(2) Operating status Operating status of CPU module (RUN/STOP/PAUSE) Page 478 Operating status
(3) Mounting status of main base unit CPU module and other modules mounted on the main base unit Page 478 Mounting status of main
base unit
(4) SD memory card Installing status of the SD memory card and status of the write protect
switch
Page 478 SD memory card
(3)
(1)
(2)
(4)
(3)
(1)
(2)
(4)