148
9 MONITOR FUNCTION
9.1 Real-Time Monitor Function
9 MONITOR FUNCTION
This chapter describes the functions for checking the CPU module operation.
9.1 Real-Time Monitor Function
This function monitors the contents of a specified device/label of the CPU module in real time at a specified interval or a
desired timing. The function can be set with GX LogViewer, where the value changes of a specified device/label can be shown
graphically. Saving the set data and displayed graphs makes it possible to simplify the settings and check the graphs at a later
time.
• Before executing the function, check the versions of the CPU module and GX LogViewer used. ( Page
1008 Added and Enhanced Functions)
For details on the function, refer to the following.
GX LogViewer Version 1 Operating Manual
Item Description Reference
Circuit monitor Checks the status of the running program on the program editor. GX Works3 Operating Manual
Device/buffer memory batch monitor Checks the current values of the device and buffer memory in a batch.
Watch Registers a device and label and checks the current values.
Program monitor list Checks the processing time of the running program.
Interrupt program monitor list Checks the number of executions of the interrupt program used in the
program.
Real-time monitor Monitors the contents of a specified device/label of the CPU module in real
time at a specified interval or a desired timing.
GX LogViewer Version 1
Operating Manual
RnCPU
RnENCPU
RnPSFCPU RnPSFCPU
RnSFCPU RnSFCPURnPCPURnPCPU
(Standard) (Safety) (Standard) (Safety)
(Redundant)
(Process)
GX LogViewer
Data in the specified device/label
are monitored in real time.
To Next Page
Loading...
