Mitsubishi Electric MELSEC iQ-R-R6SFM - Configuring the Boot Setting

146
8 BOOT OPERATION
8.4 Configuring the Boot Setting
8.4 Configuring the Boot Setting
Configure the necessary settings for the boot operation.
[Memory Card Parameters]  [Boot Setting]
Operating procedure
Displayed items
"Boot Setting" window
1. Click "Detailed Setting" on the "Boot
File Setting" window.
"Boot File Setting" window
2. Click the "Type" column. The
maximum number of boot files that
can be specified is the same as the
number of files that can be stored in
the storage memory.
"Add Type" window
3. Select type for the boot file. (Multiple
selection is possible.)
"Boot File Setting" window
4. Set the data name (file name).
Item Description Setting range Default
Operation Setting at CPU Built-in Memory Boot Sets whether or not to clear the CPU built-in memory upon file
transfer from the SD memory card.
• Do Not Clear
• Clear
Do Not Clear
Boot File Setting Sets the file used for boot operation from the SD memory
card.
