162
10 TEST FUNCTION
10.2 Device test with execution conditions
Checking and disabling registration using list window
Using the "Register/Disable Device Test With Execution Condition" window, the following operations can be performed:
checking the registration status, disabling selected registrations, collectively registering/disabling registrations, and reading/
writing registered settings from/to a file.
[Debug] [Device Test with Execution Condition] [Check/Disable Register]
The registered settings of the device test with execution conditions can be collectively disabled by the
following operation in the engineering tool: [Debug] [Device Test with Execution Condition] [Batch
Disable]
Item Description
PLC Operation for
Device Test
Condition
[Update Status] button Click this button to read the registered settings of the device test with execution conditions in the CPU
module. No data is read when this operation is performed with no settings registered.
[Disable Selected
Conditions] buttons
Click this button to disable the selected registration of the device test with execution conditions that has
been read from the CPU module by using the [Update Status] button.
[Batch Register] button All the existing registrations in the CPU module are disabled by clicking this button and the settings of the
device test with execution conditions, which have been read by using the [Update Status] button or [Read
File] button are registered to the CPU module.
[Batch Disable] button Click this button to collectively disable the registered settings of the device test with execution conditions in
the CPU module.
File Operation [Read File] button Click this button to read the registered settings of the device test with execution conditions, which have been
saved by using the [Write File] button, and list them on the window.
[Write File] button Click this button to save the registered settings of the device test with execution conditions listed on the
window into a file in the personal computer.
To Next Page
Loading...
