11 DATA LOGGING FUNCTION
11.8 Data Logging File Transfer (Auto Transfer to FTP Server)
197
11
■Setting of CPU Module Logging Configuration Tool
1. Select the "Transferring files to the FTP server" check
box in "File transfer" of CPU Module Logging
Configuration Tool. ( Page 966 Setting data logging,
Page 979 File transfer)
2. Click the [Server Setting] button.
3. Configure the server setting. To specify the FTP server
with the server name, the DNS setting is required. (
Page 196 Engineering tool setting)
4. Click the [File Transfer Test] button to execute the file
transfer test to the FTP server. Before operating the
system, execute the file transfer test and ensure the
connection with the FTP server. ( Page 198 File
transfer test)
5. Set the timeout time and other items on the "File
transfer" window. ( Page 199 Setting on the "File
transfer" window)
6. Write the setting from CPU Module Logging
Configuration Tool. ( Page 986 Writing the logging
setting)
7. The transfer is started at the logging file switching
timing. ( Page 196 Start timing of file transfer)
To Next Page
Loading...
