1 FUNCTIONS
1.2 SLMP Communications
31
1
Remote Control Remote Run 1001 0000 Executes the remote RUN to the access destination module.
Remote Stop 1002 0000 Executes the remote STOP to the access destination module.
Remote Pause 1003 0000 Executes the remote PAUSE to the access destination module.
Remote Latch
Clear
1005 0000 Executes the Remote Latch Clear to the access destination module.
Remote Reset 1006 0000 Executes the Remote RESET to the access destination module.
Read Type Name 0101 0000 Reads the model name and model code of the access destination module.
Remote
Password
Lock 1631 0000 Specifies the remote password to disable the communication with other devices.
(The locked state is activated from the unlocked state.)
Unlock 1630 0000 Specifies the remote password to enable communication with other devices.
(The unlocked state is activated from the locked state.)
File Read Directory/
File
1810 0040 Reads file list information.
Search Directory/
File
1811 0040 Reads the presence of the specified file, file No., and file size.
New File 1820 0040 Reserves storage area for the specified file.
Delete File 1822 0040 Deletes a file.
Copy File 1824 0040 Copies the specified file.
Change File
State
1825 0040 Changes file attributes.
Change File Date 1826 0040 Changes the file creation date.
Open File 1827 0040 Locks a file so that the content of the file is not changed by other devices.
Read File 1828 0000 Reads the data of a file.
Write File 1829 0000 Writes the contents in a file.
Close File 182A 0000 Cancels the file lock by open processing.
Self Test 0619 0000 Tests whether the communication with external devices is normally executed or not.
Item Command Sub
command
Description
Type Operation
To Next Page
Loading...
