Mitsubishi Electric MELSEC iQ-R02CPU - Network;Station No. <-> IP Information Setting

2 PARAMETER SETTINGS
2.3 Application Settings
265
2
Ex.
When the classes differ between the Ethernet-equipped module on the own station and the external device
Ex.
When the network address of the Ethernet-equipped module on the own station is the same as that of the external device
Network/Station No. <-> IP information setting
Set to communicate with another network module or CPU module by network number and station number.
Communication in Ethernet is performed according to the IP address and UDP port number, and access to another network is
performed according to the network number and station number.
Therefore, when the Ethernet-equipped module accesses another network, the IP address and UDP port number must be
converted into the network number and station number of the network.
Item Description Setting range
Setting System Select the system to obtain the IP address and port number of the
external device from its network number and station number. (
Page 266 Setting System)
• Automatic Response System
• IP Address Calculation System
• Table Conversion System
• Combination System
(Default: Automatic Response
System)
Subnet Mask Pattern Set the subnet mask pattern. ( Page 272 Subnet Mask Pattern) • Blank
• 0.0.0.1 to 255.255.255.255
(Default: Blank)
Conversion Settings Set the information of the external device. ( Page 272 Conversion
Settings)

10000001
81H
00000101
05H
00101111
2FH
00000001
01H
01110001
71H
00000100
04H
0100
40H
00000001
01H
0000
0000
00H
00000000
00H
000001110001
71H
0000
00H
0000
Network address
Subnet address setting value
Network address
Set the network address of the external device 2.
Own station
IP address (Class B)
External device 2
IP address (Class A)
10000001
81H
00000101
05H
00101111
2FH
00000001
01H
10000001
81H
00000101
05H
0010
29H
00000010
02H
1001
10000001
81H
0000
00H
0000
11
FFH
111111 1 1
FFH
111111 1 0
FCH
111110 0000
00H
0000
00000101
05H
0010
28H
1000
Own station
IP address (Class B)
Network address
External device 3
IP address (Class B)
Subnet address setting value
Subnet address
Subnet mask
Set the subnet address of the external device 3.