Mitsubishi Electric MELSEC iQ-R02CPU - Searching Modules on the Network

1 FUNCTIONS
1.1 Connection with MELSOFT Product and GOT
21
1
Searching modules on the network
When connecting with a hub, a list of modules that can be searched for will appear by clicking the [Find] button on the detailed
setting window.
■Search target modules
• The control CPU of the RJ71EN71 or the CPU module connected to the same hub as the engineering tool
• The control CPU of the RJ71EN71 or the CPU module connected to cascade-connected hub
• The remote head module that controls the RJ71EN71 connected to the same hub as the engineering tool
• The remote head module that controls the RJ71EN71 connected to a cascade-connected hub
• By setting "Do Not Respond to CPU Module Search" in "Security" under "Application Settings" to "Do Not
Respond", the modules will not be listed even if a search is performed.
• Only the MELSEC iQ-R Series Ethernet-equipped modules are searched.
• The RJ71EN71 in which the network type is set to "Q Compatible Ethernet" cannot be searched.