3 TROUBLESHOOTING
3.6 List of Parameter Numbers
327
3
3.6 List of Parameter Numbers
This section lists the parameter numbers displayed in the module diagnostics.
System Parameter
Basic Settings
Application Settings
Item Parameter No.
Redundant Module Group Setting 0400H
Item Parameter No.
Own Node Settings Parameter Setting Method 7100H
IP Address IP Address A012H
Subnet mask A012H
Default Gateway A013H
Communications by Network No./Station No. 7100H
Setting Method 7100H
Network Number 7100H
Station No. 7100H
Transient Transmission Group No. A010H
Enable/Disable Online Change A030H
Communication Data Code A031H
Opening Method A031H
CC-Link IEF Basic Setting Network Configuration Settings 7A00H
Refresh Settings 7420H
External Device Configuration A031H
Item Parameter No.
Frame Settings A036H
Communication Speed 7100H
FTP Server Settings A037H
FTP Client Settings A03DH
DNS Settings A03EH
Web Server Settings A035H
MODBUS/TCP Settings To Use or Not to Use MODBUS/TCP Setting A0B0H
CPU Response Monitoring Timer A0B0H
Device Assignment A0B2H
Simple PLC Communication Setting
*1
A0E1H
Time Setting A039H
Timer Settings for Data Communication A038H
Security IP Filter Settings A03AH
Disable Direct Connection with MELSOFT A034H
Do Not Respond to CPU Module Search A034H
Gateway Parameter Settings A013H
Network/Station No. <-> IP information setting A033H
Interrupt Settings Interrupt Occurrence Factor A014H
Channel No./Connection No. A014H
Detection Method A014H
Interrupt Pointer A014H
Comment A015H
IP Packet Transfer Setting A030H
Network Dynamic Routing A030H
To Next Page
Loading...
