108
*1 This setting is enabled only when "Trigger logging" is selected for Logging type.
*2 If the timing of sampling coincides with a system operation (such as a system interrupt), "*SYSTEM" is output.
*3 If the timing of sampling coincides with a system operation (such as a system interrupt), "0" is output.
*4 If any of "year", "month", "day", "hour", "minute", and "second" is missing, when the data logging file is opened by GX
LogViewer, index data will be displayed instead of time data .
GX LogViewer Version1 Operating Manual
Item Description Setting range
Data sampling interval -
-
Output data sampling interval column Information in the data sampling interval column is output to files.
Execution program name -
Output execution program name
Information in the execution program name column is output to files.
*2
Execution step No. -
Output execution step No. column
Information in the execution step No. column is output to files.
*3
Device comment output -
Output device comments for data column
Device comments are output instead of device data in the data
column.
Target memory
Specify a memory where comment files used for comment display are
stored.
• Program memory
• Standard ROM
• SD memory card
Target comment file name Specify the comment file used for comment display.
Eight alphanumeric characters
or less
Comment --
Output comments Comment lines are output to CSV files. -
Comment The comment is output in the beginning of the CSV file.
256 two-byte characters or less
(no line feed)
To Next Page
Loading...
