111
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
8
8.4 Data Logging Setting
8.4.11 Movement
8.4.11 Movement
Specify the operation after the status is switched to RUN in the following cases. ( Page 74, Section 7.1)
•Power OFF
→ ON
• Reset → RUN
•STOP → RUN
(1) Setting screen
(2) Setting items
Item Description Setting range
Operation at transition to RUN
Specify the operation at the time of status change, from power on to RUN, from reset
to RUN, or from STOP to RUN, after registration of the data logging setting.
-Auto Start Data logging is automatically started.
Start by User Operation
Data logging is temporarily stopped. To restart the data logging, the user must
perform a specific operation.
To Next Page
Loading...
