Mitsubishi Electric MELSEC-L Series - Save

109
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
8
8.4 Data Logging Setting 8.4.10 Save
8.4.10 Save
Set where to save the data logging files and when saved files are to be switched.
( Page 64, Section 6.5.2)
(1) Setting screen
(2) Setting items
(To the next page)
Item Description Setting range
File save destination
Specify the folder to which the data logging file is saved (file name). The file
name must be unique.
32 one-byte characters or less (no
two-byte characters)
File switching setting -
-
Name of file to be saved Specify the information to be appended to the file name.
Folder name The folder name set in "File save destination" is added before the file name.
Date The date (YYYYMMDD) is added before the file name.
Time The time (hhmmss) is added before the file name.