Mitsubishi Electric MELSEC-L Series

To Next Page

To Previous Page

CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL

8.4 Data Logging Setting

8.4.4 Sampling

Select a sampling method and specify the sampling interval. ( Page 51, Section 6.2)

(1) Setting screen

(2) Setting items

(To the next page)

Item Description Setting range

Sampling interval - -

Each scanning cycle Select this when data are to be sampled at each scanning cycle. -

Time specification Select this when data are to be sampled at the specified intervals. -

Time value Set a sampling interval value.

• Millisecond: 1 to 32767

• Second: 1 to 86400

Unit of time Select a unit of time. ms or s

Sample data at the first END

processing after the specified time

has elapsed

Select this when data are to be sampled in the first END

processing after the specified time has elapsed.

Mitsubishi Electric MELSEC-L Series - Sampling