122
8.6.5 Searching CPU modules on the network
CPU modules on the Ethernet network can be searched and the search results are displayed as a list if they are
connected to the hub to which the configuration tool is also connected.
(1) Operating procedure
1. In the "Transfer Setup" dialog box, select "Ethernet Board" for "PC side I/F", and double-click
"PLC Module" of "PLC side I/F".
2. Select a CPU mode for "PLC Mode".
3. Select "Connection via HUB", and click the button.
4. Select a target CPU module from the CPU information list, and click the button.
(2) Setting screen
To Next Page
Loading...
