Mitsubishi Electric MELSEC-L Series - File Access

78
7.3 File Access
The FTP server function allows saving and deletion of data logging files from the SD memory card installed in the CPU
module to the personal computer. The following commands can be used for access. When a file is to be specified, use
a command for which a folder name can be included. Available commands are shown below.
Remark
For details on command specification, refer to the following.
MELSEC-L CPU Module User's Manual (Built-In Ethernet Function)
Command Function Command Function
delete Deletes a file. mdir Stores file information in a file.
mdelete Deletes files. ls Displays a file name.
get Reads a file. mls Stores a file name in a file.
mget Reads files. rename Changes a file name.
dir Displays file information. quote change Displays or changes a file attribute.