Mitsubishi Electric MELSEC-L Series - Writing the Logging Setting into the SD Memory Card

92
8.3.5 Writing the logging setting into the SD memory card
Write the currently editing data in a form available for CPU module operation. Data are written directly to the SD
memory card in the personal computer. When the SD memory card is installed into the CPU module, logging is started.
(1) Operating procedure
1. Install an SD memory card in the personal computer.
2. Open the "Write Logging Setting into SD Memory Card" dialog box.
[Project] [Write Logging Setting into SD Memory Card]
3. Select a drive to write into.
4. Select a setting item to write.
5. Click the button.
If some data currently exist in the SD memory card before writing, the common settings and the setting data with the same
setting No. will be overwritten. Data other than the above will be held in the SD memory card. Because of this, the data to be
written may not match the data written.