81
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
8
8.2 Screen Structure
8.2.2 Menu structure
8.2.2 Menu structure
The menu structure of the configuration tool is as listed below.
Project Reference
New Creates a new project, discarding the currently editing project. Page 87, Section 8.3.1
Open Opens a project file that is stored in the local disk. Page 87, Section 8.3.2
Save Saves the current project data to the current file.
Page 89, Section 8.3.3
Save as Saves the current project file with a different name.
Read Logging Setting from SD Memory
Card
Reads the data logging setting written on an SD memory card in the personal
computer.
Page 90, Section 8.3.4
Write Logging Setting into SD Memory Card
Writes the currently editing data in a form available for CPU module operation. Data
are written directly to the SD memory card in the personal computer. When the SD
memory card is installed into the CPU module, logging is started.
Page 92, Section 8.3.5
Recent Files Lists the recently used files in the configuration tool. -
Exit Terminates the configuration tool. -
Edit Reference
Add Data Logging Setting Adds the selected data logging setting to the edit item tree.
Page 83, Section 8.2.4
Delete Data Logging Setting Deletes the data logging setting selected on the edit item tree.
Copy and Add Data Logging Setting Copies the data logging setting selected on the edit item tree and adds it.
Batch Data Insertion Sets the setting items all at once.
Cut Setting Item Cuts the setting in the tabular form.
Page 85, Section 8.2.6
Copy Setting Item Copies the setting in the tabular form.
Paste Setting Item Pastes the setting in the tabular form.
Insert Copied (Cut) Setting Item Pastes the copied (cut) setting in the tabular form.
Delete Setting Item Deletes the setting in the tabular form.
Move Setting Item Upward Moves the setting item upward.
Move Setting Item Downward Moves the setting item downward.
Device Batch Replacement Replaces all of the configured devices. Page 86, Section 8.2.7
Online Reference
Transfer Setup Performs communication setting for connection to a CPU module. Page 116, Section 8.6
Read Logging Setting Reads the setting from the CPU module. Page 124, Section 8.7
Write Logging Setting Writes the setting to the CPU module. Page 126, Section 8.8
Delete Logging Setting Deletes the setting in the CPU module. Page 126, Section 8.8
Logging Status and Operation Checks the logging status. Page 128, Section 8.9
Operate Logging File
Accesses the CPU module, and downloads or deletes a file in the SD memory card
installed in the CPU module.
Page 130, Section 8.10
Tool Reference
Start GX LogViewer Starts the viewer tool. Page 48, Section 5.3
Help Reference
About Configuration tool Displays the product information on the configuration tool. Page 135, Section 8.12.1
Open User’s Manual Displays the manual. Page 135, Section 8.12.2
To Next Page
Loading...
