80
8.2 Screen Structure
This section describes the screen structure of the configuration tool.
8.2.1 Main screen
The main screen of the configuration tool is as shown below.
(1) Displayed screen
(2) Displayed items
Name Description Reference
Menu Menu items used for executing respective functions are displayed. Page 81, Section 8.2.2
Toolbar Tool buttons used for executing respective functions are displayed. Page 82, Section 8.2.3
Edit item tree When an item on the tree is selected, the corresponding advanced settings area is displayed. Page 83, Section 8.2.4
Comment
A comment about the project can be entered. This comment is not written to the CPU module. Up
to 1024 one-byte characters (512 two-byte characters) can be entered.
-
Status bar Information on the current project is displayed. Page 84, Section 8.2.5
Advanced settings area A setting area for each function is displayed. -
To Next Page
Loading...
