124
8.7 Read Logging Setting
Data logging setting data can be read out from the target memory of the CPU module.
(1) Operating procedure
1. Display the "Online Operation (Read out Logging Setting)" screen.
[Online] [Read Logging Setting]
2. From the "Target memory" list, select the memory where the data to be read are stored.
3. Select the target data in the "Target logging setting data" area.
4. Click the button.
● If some data currently exist in the configuration tool before reading, the common settings and the setting data with the
same setting No. will be overwritten. Data other than the above will be held in the configuration tool. Because of this, the
data to be read out may not match the data read out.
● If a remote password entry screen appears, enter the configured password.
For the remote password, refer to the following.
MELSEC-L CPU Module User’s Manual (Function Explanation, Program Fundamentals)
To Next Page
Loading...
