Mitsubishi Electric MELSEC-L Series - Chapter 2 System Configuration; Overall System Configuration

22
CHAPTER 2 SYSTEM CONFIGURATION
A system configuration in the case of using data logging is shown below.
2.1 Overall System Configuration
An overall system configuration in the case of using data logging is shown below.
For connection to the CPU module, refer to Page 28, Section 2.2.
Configuration tool
(LCPU Logging Configuration Tool)
Viewer tool
(GX LogViewer)
Personal computer
SD memory card
(sold separately, required)
LCPU
Display
Configurations
Ethernet, CC-Link, or C24
SD memory card
(sold separately, required)
SD memory card
(sold separately, required)
SD memory card
(sold separately, required)
LCPU
LCPU
LCPU
Connection from USB or serial port
( )
Connection from interface board
( )
Connection via network
( )
Page 24, Section 2.1.2
Page 27, Section 2.1.3
Page 24, Section 2.1.2