118
8.6.2 Connection via a network
The following explains the screen operation.
(1) Operating procedure
1. In the "PC side I/F" area, select and double-click an interface on the personal computer where the
configuration tool is installed.
2. In the "PLC side I/F" area, select and double-click an interface on the CPU module side.
3. In the "Other Station Setting" area, specify the presence or absence of other stations.
4. In the "Network Communication Route" area, configure the settings of the network to be routed for
access to another station, and click the button. (The settings differ
depending on the network type.)
(2) Setting screen
To Next Page
Loading...
