119
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
8
8.6 Transfer Setup
8.6.2 Connection via a network
(3) Setting items and buttons
Item Description Reference
PC side I/F Set the interface of the personal computer. -
PLC side I/F Set the interface on the CPU module side. -
Other Station Setting - -
No Specification
Select this when accessing the LCPU that is directly connected to
the personal computer.
-
Other Station (Single Network)
Select this when accessing a CPU module on another station via a
single network (including a multi-layer system).
-
Other Station (Co-existence Network)
Select this when connecting a personal computer and a Q series
CPU module and accessing from the CPU module to another CPU
module on another station via CC-Link or a serial communication
module.
-
Network Communication Route
For an access to another station via a network, select a network type,
and specify the network No. and station No. and head I/O. The
settings differ depending on the network type.
-
button
Display a list of routes. Since a route selected from the list is
automatically set in the "Transfer Setup" dialog box, the setting is
easy even in the case of a complex system.
Page 121, Section 8.6.4
button
Enables the setting for directly connecting the CPU module and a
personal computer.
Page 116, Section 8.6.1
button
Checks if an access to the CPU module specified in the "Transfer
Setup" dialog box is possible or not. If the access is made properly,
the model name of the accessed CPU module is displayed in the
"PLC Type" box.
Page 120, Section 8.6.3
button
Displays a graphical image of the configured route. -
To Next Page
Loading...
