117
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
8
8.6 Transfer Setup
8.6.1 Connection with a USB or Ethernet cable
(b) "Transfer Setup" dialog box
(3) Operation buttons
Item Description Reference
button
Displays a list of routes. Since a route selected from the list is
automatically set in the "Transfer Setup" dialog box, the setting is
easy even in the case of a complex system.
Page 121, Section 8.6.4
button
Enables the setting for directly connecting the CPU module and a
personal computer.
Page 116, Section 8.6.1
button
Checks if an access to the CPU module specified in the "Transfer
Setup" dialog box is possible or not. If the access is made properly,
the model name of the accessed CPU module is displayed in the
"PLC Type" box.
Page 120, Section 8.6.3
button
Displays a graphical image of the configured route. -
To Next Page
Loading...
