123
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
8
8.6 Transfer Setup
8.6.5 Searching CPU modules on the network
(3) Setting items and buttons
For Windows Vista , clicking the button may display the following message. Click
the button to continue.
"
Item Description
PLC Mode Select a mode of the CPU module that is connected to the personal computer.
Ethernet Port Direct Connection
Select this when directly connecting a personal computer to the Ethernet port of
the CPU module with a cable.
Connection via HUB
Select this when connecting a personal computer to the CPU module by
specifying an IP address.
IP Address Specify the IP address of the CPU module.
Host Name Specify the host name of the CPU module.
CPU information list
IP addresses, CPU types, labels, and comments of the detected CPU modules
are displayed.
Response Wait Time The time waiting for CPU module search results (1 to 99 seconds) is displayed.
button
Searches for CPU modules on the network and displays the CPU information list.
button
Automatically enters the IP address of the CPU module selected in the CPU
information list into the "IP Address" setting area.
To Next Page
Loading...
