131
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
8
8.10 Logging Status and Operation
(2) Setting screen
(3) Setting items and buttons
Item Description
Start (Stop) Monitoring starts when it is stopped. Or, monitoring stops when monitoring is in execution.
SD memory card data Free space in the SD memory card is displayed.
button
Selects all of the setting data.
button
Clears all of the target settings.
Target memory
Select a memory that is the target for the data logging status and operation. (Selectable only when all of the data loggings
are stopped.)
Logging status -
Target Select any target setting data.
No. Setting No. is displayed.
Data logging name The data logging name is displayed.
Logging type The logging type is displayed.
Logging status The logging status is displayed.
button
This button is displayed on the extreme right of each line if an error occurs. Clicking this will display the Details dialog box.
( Page 130, Section 8.10(4)(a))
button
Executes logging of the selected setting data.
button
Temporarily stops logging of the selected setting data.
button
Stops logging of the selected setting data.
To Next Page
Loading...
