20
(4) Configuration for logging is simple.
Logging settings can be configured easily by following the wizard.
(5) A large volume of logging files can be stored.
Use of an SD memory card of up to 4GB enables a long-term logging.
(6) Data sampling for troubleshooting can be instructed easily.
Data required for troubleshooting can be collected by simply sending an SD memory card (where auto logging
setting data are stored) to the factory floor and inserting it into the slot of the CPU module. (Auto logging function)
Furthermore, the logged data can be analyzed if the SD memory card is returned to the office after termination of
the logging.
Completed!!
SD memory card
1) Sending
3) Return
Office
Factory floor
2) Data sampling
Logging starts automatically by inserting the
SD memory card into the slot of the CPU module.
4) Data analysis
To Next Page
Loading...
