34
Output of the following information can be disabled. ( Page 107, Section 8.4.9)
• Date and time column
• Trigger information column (selectable only for trigger logging)
• Index column
• Data sampling interval column
• Execution program name column
• Execution step No. column
• Comment line
(1) File information line
Information on the file is displayed.
*1 The size of the File information line is the total of the following. (When outputting a comment)
9 (File type) + 2 (File version) + 1 (Data type information
line number) + 1 (Line No. of Data name line number) +
1 (Data start
line number) + 1 (Comment line number) + 5 (number of commas) + 2 (CR + LF)
= 22 bytes
(2) Comment line
A comment is displayed.
*1 The size of the Comment line is the total of the following.
The size of the characters used for the comment (1 byte for each one-byte character, 2 bytes for each two-byte
character) + 2 (CR + LF)
Item Description
Size
*1
File type [LOGGING] is output. 9 bytes
File version File version (fixed to L1) 2 bytes
Data type information line
number
Line number indicating the Data type information line is entered. 1 byte
Data name line number Line number indicating the Data name line is entered. 1 byte
Data start line number Line number indicating the first of the data lines is entered. 1 byte
Comment line number
Line number indicating the Comment line is entered. If the Comment line data are not to
be output, this field is left blank.
0 to 1 byte
Item Description
Size
*1
Comment
A comment set in the configuration tool is output. (Up to 512 one-byte or 256 two-byte
characters can be output. If there is no setting, blank space is output.)
0 to 512 bytes
To Next Page
Loading...
