36
(4) Data name line
The data name of each column is displayed.
*1 The device comment of the comment file specified in the setting is displayed.
*2 Even if "Output device comments for data column" is selected, device No. is displayed when:
• No device comment is set.
• The specified device comment file does not exist.
• A digit-specified bit device is specified for sampling data.
• A bit-specified word device is specified for sampling data.
*3 The size of the Data name line is the total of the following.
When logging 128-point data in D100 to D227
(when the date and time, data sampling interval, execution step No, execution program name, and
index columns are selected for output, and when device No. is selected for the data column)
4 (date and time) + 12 (data sampling interval) + 8 (execution step No.) + 12 (execution program
name) + 5 (index) + (4 × 128) (data) + 132 (number of commas) + 2 (CR + LF)
= 687 bytes
Item Description
Size
*3
Date and time column TIME is output. 4 bytes
Data sampling interval
column
INTERVAL [us] is output. 12 bytes
Execution step No. column STEP NO. is output. 8 bytes
Execution program name
column
PROGRAM NAME is output. 12 bytes
Index column INDEX is output. 5 bytes
Data column
"Device No." or "Device comment"
*1*2
specified in the setting is displayed.
1 to 32 bytes
Trigger information column Trigger is output. 7 bytes
Ex.
To Next Page
Loading...
