43
CHAPTER 5 START-UP OF THE CONFIGURATION TOOL
5
5.2 Installation Method
5.2.1 Installation procedure
↓
3. If the MELSOFT or any other software required has
not been installed properly, the left screen is
displayed, and the installation cannot continue until
Windows is restarted. In this case, restart
Windows and then start the installation again. (Go
back to step 1.)
↓
4. A message dialog box appears, advising you to
terminate other applications. Ensure that no other
applications are running. (Terminate any other
application.)
↓
5. The installation start screen appears. Click the
button.
↓
6. Enter user information, and click the
button.
↓
To the next page
To Next Page
Loading...
