Mitsubishi Electric MELSEC-L Series - Page 56

54
The following devices can be specified as device data conditions.
*1 The built-in I/O function does not support the U\G specification.
*2 Digit specification of bit device is available only for K1 to K4.
*3 T (contact), ST (contact), and C (contact) are specified with TS, SS, and CS respectively.
For the above devices, the following modification is available.
• Indirect specification
• Index modification (except FX,FY, FD, BL\S, and bit specification of word device)
Type Description
Bit device
X, Y, M, L, F, SM, V, B, SB, T (contact)
*3
, ST (contact)
*
, C (contact)
*3
, FX, FY, BL\S
Bit specification of word device:
D, D (extended data register), SD, W, W (extended link register), SW, R, ZR, FD, U\G
*1
Word device
T (current value), ST (current value), C (current value), D, D (extended data register), SD, W, W (extended link
register), SW, R, Z, ZR, FD, U\G
*1
Digit specification of bit device
*2
: X, Y, M, L, F, SM, V, B, SB, BL\S