Mitsubishi Electric MELSEC-L Series - Setting Parameters Required for Communications

63
CHAPTER 6 DATA LOGGING FUNCTION
6
6.4 Data Logging Status
(4) Completion
Data logging is completed with the data logging setting registered. Perform the following.
(a) For Continuous logging
In the "Save" setting of the data logging setting, when "Stop" is selected for "Operation occurring when number
of saved files is exceeded", the data logging is completed at the time the number of saved files reaches the
specified value.
(b) For Trigger logging
After sampling the data, of which number of records is specified in the "Save" setting of the data logging
setting, and after saving them to an SD memory card, the data logging is completed.