Mitsubishi Electric MELSEC-L Series - Data Communication Procedure

95
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
8
8.4 Data Logging Setting 8.4.1 Data logging setting list
(3) Displayed items and button
● The operations do not depend on the order of the data logging settings.
● By clicking multiple lines while pressing the or key, these lines can be deleted or replaced all at once.
Item Description Setting Reference
No. The data logging setting No. is displayed. 01 to 10 -
Data logging name The data logging name is displayed.
Any name (32 one-byte or 16
two-byte characters)
-
Logging type The logging type is displayed. Continuous/Trigger
Page 98,
Section 8.4.3
File format The file format of the data logging file is displayed. CSV (fixed) -
Sampling interval The target data sampling interval of the data logging is displayed.
LoggingIntervalDataContinuou
s/s/ms
Page 99,
Section 8.4.4
Number of records The number of trigger logging records is displayed. -
Page 106,
Section 8.4.8
Before trigger The number of logging records before trigger is displayed. 0 to 999999
After trigger The number of logging records after trigger is displayed. 1 to 1000000
CSV output The CSV output setting for the data logging file is displayed. -
Page 107,
Section 8.4.9
Date Whether the date and time (time stamp) is output or not is shown.
To be outputted/Not to be
outputted
Trigger information Whether trigger information exists or not is shown.
To be outputted/Not to be
outputted
Save The storage location of the data logging file is displayed. -
Page 109,
Section 8.4.10
File save destination The destination to save is displayed.
Any destination (32 one-byte
characters)
File switching timing Switching timing of the data logging file is displayed.
No. of records, File size,
Setting/Trigger logging
Name of file to be saved The saved file name after switching is displayed. Date, time, and folder name
Number of saved files The upper limit in the number of files is displayed. 1 to 65535
Logging operation The data logging setting in the case of transition to RUN is displayed.
Auto Start/Start by User
Operation
Page 111,
Section 8.4.11
Total Size of Output Logging Files
[MB]
The total size of the logging files output for each logging setting is
displayed.
-
Page 112,
Section 8.4.12
button
Displays the data logging setting area, allowing editing of the setting for the selected line. When a
blank line is selected, a new data logging setting is added. (If multiple lines are selected, they will be
masked.)
Page 94,
Section 8.4.1
Ctrl
Shift