Mitsubishi Electric MELSEC-Q Series - Page 30

1 - 9
1 OVERVIEW
Programming software version
Section of reference
MELSOFT MT Works2 (MT Developer2)
MR Configurator2 MR Configurator
Q173DSCPU/Q172DSCPU Q173DCPU(-S1)/Q172DCPU(-S1)
— — — — (Note-2)
1.39R 1.06G — —
Section 4.3.3
Section 6.1.7
1.39R 1.06G 1.01B C2
— — — — Section 3.3
1.39R 1.06G — — (Note-3)
— — — — (Note-5)
— — — — (Note-4)
1.39R 1.06G — — (Note-5)
— — — — (Note-5)
1.39R 1.09K — — (Note-4)
1.39R 1.09K — —
Section 6.17.3
Section 6.17.4
1.39R 1.15R — —
1.39R 1.15R — — (Note-5)
1.39R 1.15R — — (Note-3)
1.39R 1.15R — — (Note-3)
1.39R 1.15R — — Section 6.23.13
1.39R 1.17T — —
— — — — Section 4.3.1
—: There is no restriction by the version.
(Note-1): SV13/SV22 is the completely same version.
(Note-2): The operating system software version can be confirmed in the operating system software (CD-ROM), MT Developer2 or
GX Works2/GX Developer. (Refer to "Q173D(S)CPU/Q172D(S)CPU Motion controller Programming Manual (COMMON) Section
1.3, 1.4".)
(Note-3): Q173D(S)CPU/Q172D(S)CPU Motion controller (SV13/SV22) Programming Manual (Motion SFC)
(Note-4): Q173D(S)CPU/Q172D(S)CPU Motion controller (SV22) Programming Manual (VIRTUAL MODE)
(Note-5): Q173D(S)CPU/Q172D(S)CPU Motion controller Programming Manual (COMMON)
(Note-6): Q173D(S)CPU/Q172D(S)CPU Motion controller Programming Manual (Safety Observation)
(Note-7): Q173DSCPU/Q172DSCPU Motion controller (SV22) Programming Manual (Advanced Synchronous Control)