Mitsubishi Electric MELSEC-Q Series - Page 32

1 - 11
1 OVERVIEW
Programming software version
Section of reference
MELSOFT MT Works2 (MT Developer2)
MR Configurator2 MR Configurator
Q173DSCPU/Q172DSCPU Q173DCPU(-S1)/Q172DCPU(-S1)
1.39R 1.39R — — (Note-3)
1.39R 1.39R — — (Note-3)
— — — — (Note-3)
— — — — Section 3.3
1.39R 1.39R — — (Note-6)
— Not support — — Section 6.13
— — — — (Note-5)
— Not support — — (Note-5)
1.47Z Not support — — (Note-7)
1.47Z Not support — — (Note-5)
— Not support — — (Note-5)
1.56J Not support — — (Note-5)
1.56J Not support — — (Note-5)
1.56J Not support — — (Note-3)
1.56J Not support — — Section 7.8
1.56J Not support — — Section 6.23.14
1.56J Not support — — Section 7.2
1.56J Not support — — (Note-7)
1.56J Not support — — (Note-7)
1.34L 1.15R — — Appendix 6.1
1.56J Not support — — Appendix 6.1
1.34L 1.15R — — Appendix 6.2
1.68W Not support 1.23Z Not support (Note-7)
1.68W Not support 1.23Z Not support (Note-5)
— Not support — — Appendix 6.4
1.118Y Not support — — Section 6.23.15
1.118Y Not support — — Appendix 6.5
1.118Y Not support — — Appendix 6.1
1.118Y Not support — — Appendix 6.6
1.120A Not support — — Appendix 6.3
—: There is no restriction by the version.
(Note-1): SV13/SV22 is the completely same version.
(Note-2): The operating system software version can be confirmed in the operating system software (CD-ROM), MT Developer2 or
GX Works2/GX Developer. (Refer to "Q173D(S)CPU/Q172D(S)CPU Motion controller Programming Manual (COMMON) Section
1.3, 1.4".)
(Note-3): Q173D(S)CPU/Q172D(S)CPU Motion controller (SV13/SV22) Programming Manual (Motion SFC)
(Note-4): Q173D(S)CPU/Q172D(S)CPU Motion controller (SV22) Programming Manual (VIRTUAL MODE)
(Note-5): Q173D(S)CPU/Q172D(S)CPU Motion controller Programming Manual (COMMON)
(Note-6): Q173D(S)CPU/Q172D(S)CPU Motion controller Programming Manual (Safety Observation)
(Note-7): Q173DSCPU/Q172DSCPU Motion controller (SV22) Programming Manual (Advanced Synchronous Control)