Appendix - 10
Appendices
Buffer memory address Item
Memory
area
5900
[Cd.1] Flash ROM write request
System control data
Control data
5901
[Cd.2] Parameter initialization request
5905
[Cd.41] Deceleration start flag valid
5907
[Cd.42] Stop command processing for deceleration stop
selection
5928
5929
5930
5931
[Cd.44] External input signal operation device (Axis 1 to 16)
6000+1000n
[Da.1] Operation pattern
Positioning
identifier
No.1
Positioning data
Positioning data
[Da.2] Control method
[Da.3] Acceleration time No.
[Da.4] Deceleration time No.
6001+1000n
[Da.10] M code/condition data No. /Number of LOOP to
LEND repetitions
6002+1000n
[Da.9] Dwell time/JUMP destination positioning data No.
6003+1000n
[Da.20] Axis to be interpolated No.1
Axis to be
interpolated
[Da.21] Axis to be interpolated No.2
[Da.22] Axis to be interpolated No.3
6004+1000n
6005+1000n
[Da.8] Command speed
6006+1000n
6007+1000n
[Da.6] Positioning address/movement amount
6008+1000n
6009+1000n
[Da.7] Arc address
6010+1000n
to
6019+1000n
No.2
6020+1000n
to
6029+1000n
No.3
to
to
6990+1000n
to
6999+1000n
No.100
Set with
GX Works2
No.101
to
No.600
n: Axis No.-1
To Next Page
Loading...
