Mitsubishi Electric NZ2EX2B-60AD4 - Page 45

43
CHAPTER 3 SPECIFICATIONS
3
3.7 List of Remote Buffer Memory Areas
(4) Module control data area (address: 1000H to 14FFH)
*1 Value at the time of turning off and on the module power supply or at the time of remote reset.
*2 This shows whether reading/writing data from/to a program is possible.
R: Readable
W: Writable
(a) Module control data area of the extension module
The remote buffer memory differs depending on the model of the extension module.
• For the extension A/D converter module, refer to  Page 45, Section 3.7.2 (3).
• For the extension D/A converter module, refer to  CC-Link IE Field Network Digital-Analog Converter
Module User's Manual.
• For the extension I/O module, refer to  CC-Link IE Field Network Remote I/O Module User's Manual.
Type
Address
Description
Default
value
*1
Read/Write
*2
Decimal Hexadecimal
Station-based control
data
4096 1000H Error history clear command 0 R/W
4097 1001H Error history clear completed 0 R
4098 1002H Parameter area initialization command 0 R/W
4099 1003H Parameter area initialization completed 0 R
4100 1004H
Module operation information initialization
command
0R/W
4101 1005H
Module operation information initialization
completed
0R
Station-based control
data
4102 to 4351 1006H to 10FFH System area 
Main module
Module-based control
data
4352 to 4607 1100H to 11FFH System area 
Extension module 1
Module-based control
data
4608 to 4863 1200H to 12FFH
The remote buffer memory areas of the
connected extension module are assigned.

 4864 to 5375 1300H to 14FFH System area 