Installation Transport robot arm
SD-/SQ series 3 - 5
Never carry the robot arm at its side or at the axles without holding points because this could
result in damages.
Use a dolly if transporting longer distances. Only carry at the holding points for short periods of
time.
Avoid knocks (impact loads) when transporting the robot arm.
R001298E
Fig. 3-5: Transport 6-axle robot arm RV-3SD or RV-3SQ
E
ATTENTION:
Only remove the transport locks after installing the robot arm.
Transport
lock J1
Upper
Base
Front view
Shoulder
Transport
lock
Side view
To Next Page
Loading...
