Mitsubishi EasyPhoto MT1 series - Order Barcode Settings

Operator user‟s manual
58/78
Order barcode settings
This is a unique barcode being printed for the whole order, including the total price and
global reference to the easyphoto service for the shop accounting.
 Print order barcode: When it‟s enabled, a barcode will be printed for every order
generated in the machine.
 Length: it allows setting the length of each part that composes the barcode.
o Reference: Number of digits used to show the order reference.
o Amount: Number of digits used to show the order price.
 Reference: This is the code that identifies an easyphoto order.
 Position: It specifies which field (Reference or Amount) is placed first in the barcode.