Operator user‟s manual
46/78
4.2.1 Main
Once the “Main” button is pressed, the following screen is showed:
On this section you can choose:
Workflow mode: Kiosk mode / Operator mode / Order Terminal mode
Available languages for the end customer in mode Kiosk („Kiosk language‟)
Current country
Date and time setting (for ticket printer)
Enable/disable ticket printer (if available)
Please choose:
„Operator‟ mode when Easyphoto has to be used by operators and the supervisor.
„Kiosk‟ mode when Easyphoto has to be used by end users (end customers) as a semi-
attended photo system.
„Order Terminal‟ mode when Easyphoto is attached to a Flexilab system. THIS ONE
REQUIRES AN ADDITIONAL LICENSE.
Once the Kiosk mode, Order Terminal or Operator mode have been selected:
Press the “Show available languages at first screen” button to show the available languages
at fist screen.
Press the “Show disclaimer” button to show the legal disclaimer at the beginning of the
operation of Easyphoto.
Press the “Use password for order validation” to introduce the password at the “Order
summary” screen.
In Operator mode the main screen should be shown like this (with default values): no language
selection is available. There is no need for the operator to choose a different language than
default one, and also prices list and disclaimer have no sense to be shown.
To Next Page
Loading...
Need help?
General
