Mitsubishi FREQROL-SF User Manual

Reference Setting and
I-
I
L
I Rewrite the (
I.2
ta
T
1
When pressing the @ switch, data
can be rewritten.
At the time, the
address display LED blinks and
indicates that the data can be re-
written.
In addition, the data corresponding
to the address appears.
(Example)
0 When pressing the m switch in the
state as shown in Figure 2, Gi
appears.
When the switch is pres-
sed once again, [:t:
appears.
(Figure 3).
0
When pressing the @ switch in
the state as shown in Figure 3,
SL' appears.
When pressing the
same switch once again, C: appears.
(Figure 2)
Select data using the UP
0 and m
switches.
To increment the data
value,
press the UP switch.
Cl
To decrement the data value, press
the @ switch.
When pressing the n switch once
again, data rewrite operation is
completed.
At the time, the
address display LED steadily
lights rather than blinking.
(Note 1)
For the position
of the pushbutton
switch PBl, see
Appendix 6(l)
"SF-CA card".
(Note 2)
It is possible to
press the pushbutton
switch PBl only once
after all data write
operation is com-
pleted.
-186-

Mitsubishi FREQROL-SF Specifications

General

Brand	Mitsubishi
Model	FREQROL-SF
Category	DC Drives
Language	English