To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Mitsubishi MELSEC and is the answer not in the manual?
General| Category | Programmable Logic Controller (PLC) |
|---|---|
| Manufacturer | Mitsubishi Electric |
| Series | MELSEC |
| Programming Languages | Ladder Diagram (LD), Function Block Diagram (FBD), Structured Text (ST), Instruction List (IL), Sequential Function Chart (SFC) |
| Communication Protocols | Ethernet, CC-Link, RS-232, RS-485, USB, Profibus, Modbus |
| Model Series | FX, Q, L, iQ-R, iQ-F |
| Input Voltage | 100-240V AC, 24V DC (varies by model) |
| Memory Capacity | Varies widely depending on the CPU module and series. Ranges from kilobytes to megabytes. |
| I/O Points | 16 to 8192 points (varies by model) |
| Communication Ports | Ethernet, RS-232, RS-485, USB (varies by model) |
| Programming Software | GX Works2, GX Works3, GX Developer |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -25°C to 75°C |
| Humidity | 5% to 95% (non-condensing) |
| Vibration Resistance | 10 to 57Hz, 0.075mm amplitude; 57 to 150Hz, 9.8m/s² acceleration |
| Shock Resistance | 147m/s², 3 times in each direction (X, Y, Z) |
| Protection Class | IP20 (varies by model) |
| CPU Processing Speed | 0.02μs to 0.1μs per instruction (varies by model) |
