Mitsubishi MELSEC User Manual

A - 12
(Related manual).................QSCPU User's Manual (Function Explanation, Program Fundamentals)
CONTENTS
SAFETY PRECAUTIONS
REVISIONS
INTRODUCTION
CONTENTS
ABOUT MANUALS
HOW TO SEE THIS MANUAL IS ORGANIZED
HOW TO USE THIS MANUAL
GENERIC TERMS AND ABBREVIATIONS
CHAPTER1 OVERVIEW
1.1 Features
1.2 Program Storage and Operation
1.3 Devices and Instructions Convenient for Programming
1.4 How to Check the Serial No. and Function Version
CHAPTER2 PERFORMANCE SPECIFICATION
CHAPTER3 SEQUENCE PROGRAM CONFIGURATION AND EXECUTION CONDITIONS
3.1 Sequence Program
3.1.1 Sequence program description method
3.1.2 Sequsence program operation
3.2 Concept of Scan Time
3.3 Operation Processing
3.3.1 Initial processing
3.3.2 CC-Link Safety, MELSECNET/H refresh
3.3.3 I/O refresh
3.3.4 END processing
3.4 RUN, STOP, PAUSE Operation Processing
3.5 Operation Processing during Momentary Power Failure
3.6 Data Clear Processing
3.7 Numeric Values which can be Used in Sequence Programs
3.7.1 BIN (Binary Code)
3.7.2 HEX (Hexadecimal)
3.7.3 BCD (Binary Coded Decimal)
CHAPTER4 I/O NUMBER ASSIGNMENT
4.1 Definition of I/O Number
4.2 Concept of I/O Number Assignment

Mitsubishi MELSEC Specifications

General

Category	Programmable Logic Controller (PLC)
Manufacturer	Mitsubishi Electric
Series	MELSEC
Programming Languages	Ladder Diagram (LD), Function Block Diagram (FBD), Structured Text (ST), Instruction List (IL), Sequential Function Chart (SFC)
Communication Protocols	Ethernet, CC-Link, RS-232, RS-485, USB, Profibus, Modbus
Model Series	FX, Q, L, iQ-R, iQ-F
Input Voltage	100-240V AC, 24V DC (varies by model)
Memory Capacity	Varies widely depending on the CPU module and series. Ranges from kilobytes to megabytes.
I/O Points	16 to 8192 points (varies by model)
Communication Ports	Ethernet, RS-232, RS-485, USB (varies by model)
Programming Software	GX Works2, GX Works3, GX Developer
Operating Temperature	0°C to 55°C
Storage Temperature	-25°C to 75°C
Humidity	5% to 95% (non-condensing)
Vibration Resistance	10 to 57Hz, 0.075mm amplitude; 57 to 150Hz, 9.8m/s² acceleration
Shock Resistance	147m/s², 3 times in each direction (X, Y, Z)
Protection Class	IP20 (varies by model)
CPU Processing Speed	0.02μs to 0.1μs per instruction (varies by model)