Mitsubishi MELSEC User Manual

1 - 2
1
OVERVIEW
(1) List of QS Series CPU Module manuals
The QS series CPU module manuals are as shown below.
For details such as manual numbers, refer to "About Manuals" in this manual.
Table1.1 List of manuals of QS Series CPU module
Purpose
QSCPU CPU
Module User's
Manual (Hardware)
QSCPU User's
Manual (Hardware
Design,
Maintenance and
inspection)
QSCPU User's
Manual (Function
Explanation,
Program
Fundamentals)
QSCPU
Programming
Manual (Common
Instruction)
Confirmation of part names and
specifications of the CPU module
Confirmation of connection methods
for the power supply module,and base
unit
Construction of the CPU system
(confirmation of start-up procedure
and I/O number assignment)
Confirmation of the sequence program
configuration and memory
Confirmation of the functions,
parameters, and devices of the CPU
module
Confirmation of the troubleshooting
and error codes
Confirmation of usage of sequence
instructions, basic instructions,
application instructions, etc.
Hard
ware
(Packed)
Maintenance
and Inspection
Program
Fundamentals
Common
Instructions
Outline
Details
Outline
Outline
Details
Details
Details
Details
Details
Details

Mitsubishi MELSEC Specifications

General

Category	Programmable Logic Controller (PLC)
Manufacturer	Mitsubishi Electric
Series	MELSEC
Programming Languages	Ladder Diagram (LD), Function Block Diagram (FBD), Structured Text (ST), Instruction List (IL), Sequential Function Chart (SFC)
Communication Protocols	Ethernet, CC-Link, RS-232, RS-485, USB, Profibus, Modbus
Model Series	FX, Q, L, iQ-R, iQ-F
Input Voltage	100-240V AC, 24V DC (varies by model)
Memory Capacity	Varies widely depending on the CPU module and series. Ranges from kilobytes to megabytes.
I/O Points	16 to 8192 points (varies by model)
Communication Ports	Ethernet, RS-232, RS-485, USB (varies by model)
Programming Software	GX Works2, GX Works3, GX Developer
Operating Temperature	0°C to 55°C
Storage Temperature	-25°C to 75°C
Humidity	5% to 95% (non-condensing)
Vibration Resistance	10 to 57Hz, 0.075mm amplitude; 57 to 150Hz, 9.8m/s² acceleration
Shock Resistance	147m/s², 3 times in each direction (X, Y, Z)
Protection Class	IP20 (varies by model)
CPU Processing Speed	0.02μs to 0.1μs per instruction (varies by model)