Mitsubishi MELSEC User Manual

2 - 6
2.3 Confirming Serial No. and Function Version
2
SYSTEM CONFIGURATION
Remark
The serial number is displayed on the front of the module from March 2008
production.
Products manufactured during switching period may not have the serial number
on the front of the module.
(3) Confirming the serial No. on the system monitor (Product Information List)
To display the System monitor screen, select [Diagnostics] [System monitor] and
click the Product Information List button in GX Developer.
On the system monitor, the serial No. and function version of the intelligent function
module can also be confirmed.
POINT
The serial number displayed on the Product information list screen of GX
Developer may differ from that on the rating plate and on the front of the module.
• The serial No. on the rated plate describes the management information
of the product.
• The serial No. displayed on the product information of GX Developer
describes the function information of the product.
The function information of the product is updated when adding functions.
Figure 2.6 System monitor
Serial number function version

Mitsubishi MELSEC Specifications

General

Category	Programmable Logic Controller (PLC)
Manufacturer	Mitsubishi Electric
Series	MELSEC
Programming Languages	Ladder Diagram (LD), Function Block Diagram (FBD), Structured Text (ST), Instruction List (IL), Sequential Function Chart (SFC)
Communication Protocols	Ethernet, CC-Link, RS-232, RS-485, USB, Profibus, Modbus
Model Series	FX, Q, L, iQ-R, iQ-F
Input Voltage	100-240V AC, 24V DC (varies by model)
Memory Capacity	Varies widely depending on the CPU module and series. Ranges from kilobytes to megabytes.
I/O Points	16 to 8192 points (varies by model)
Communication Ports	Ethernet, RS-232, RS-485, USB (varies by model)
Programming Software	GX Works2, GX Works3, GX Developer
Operating Temperature	0°C to 55°C
Storage Temperature	-25°C to 75°C
Humidity	5% to 95% (non-condensing)
Vibration Resistance	10 to 57Hz, 0.075mm amplitude; 57 to 150Hz, 9.8m/s² acceleration
Shock Resistance	147m/s², 3 times in each direction (X, Y, Z)
Protection Class	IP20 (varies by model)
CPU Processing Speed	0.02μs to 0.1μs per instruction (varies by model)