7. PARAMETERS
7 - 55
No./symbol/
name
Setting
digit
Function
Initial
value
[unit]
Control
mode
CP CL
PD41
*DIA3
Input signal
automatic on
selection 3
Select input devices to turn on automatically.
_ _ _ x _ _ _ x (BIN): MD1 (operation mode selection 2)
0: Disabled (Use for an external input signal.)
1: Enabled (automatic on)
0h
(HEX)
_ _ x _ (BIN): For manufacturer setting
_ x _ _ (BIN): For manufacturer setting
x _ _ _ (BIN): For manufacturer setting
_ _ x _ _ _ _ x (BIN): For manufacturer setting 0h
(HEX) _ _ x _ (BIN): For manufacturer setting
_ x _ _ (BIN): OVR (Analog override selection)
0: Disabled (Use for an external input signal.)
1: Enabled (automatic on)
x _ _ _ (BIN): For manufacturer setting
_ x _ _ For manufacturer setting 0h
x _ _ _ 0h
Convert the setting value into hexadecimal as follows.
0
Initial value
BIN HEX
Input device
0
0
00
0
0
MD0 (Operation mode selection 1)
0
Initial value
BIN HEX
Input device
0
0
0OVR (Analog override selection)
BIN 0: Use for an external input signal.
BIN 1: Automatic on
0
To Next Page
Loading...
