Instruction Manual #122162 2
This product is intended for use by industrial customers and should be
serviced only by MKS trained representatives. The service manuals and
related materials are provided in English at no charge and are intended for
use by experienced technicians. It is the responsibility of the user to obtain
and assure the accuracy of any needed translations of manuals. If you
require assistance, contact the MKS Customer Service group. Contact
information can be found on page 3 of this instruction manual and at
www.mksinst.com. The MKS Technical Support Group notifies users of
record if safety-related upgrades or new hazards associated with the product
are identified.
Record the Serial Numbers and Model Numbers
The model number, serial number and revision reference of each component may be found on
the SENTRY Controller and SENTRY Supervisor serial tags. The model number and revision
reference of the cables may be found as a label on each cable. For your convenience, record the
numbers below and retain this manual and information for future reference.
1) SENTRY Controller
Model Number:
Serial Number:
2) SENTRY Supervisor
Model Number:
Serial Number:
4) Tool/Host to SENTRY Supervisor
Interface Cable
Model Number:
-OR-
Stand-Alone Power Supply Cable
Model Number:
3) SENTRY Supervisor to SENTRY
Controller Cable
Model Number:
5) Serial Communication Cable
Model Number:
Sentry
TM
, Sentry 1510
TM
, Aerodynamic Resistor Valve
TM
, and Vacuum Regulation Valve
TM
are trademarks of MKS Instruments, Inc.
To Next Page
Loading...
Need help?
General
