EasyManua.ls Logo

Mobotix Q26 - 2.9 Network and Power Connection, Additional Cables

Mobotix Q26
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
101
Network and Power Connection, Additional Cables
2.9 Network and Power Connection, Additional Cables
2.9.1 Notes on Cable Lengths and Power Supply
Power is supplied to the camera via the camera Ethernet connection (patch or installation
cable). We recommend using a MOBOTIX PoE adapter or another similar high-quality
PoE product to loop-in the power supply:
One camera: with the PoE adapter (MX-NPA-PoE or MX-NPA-Box)
Multiple cameras: with PoE products conforming to IEEE 802.3af (PoE switch)
The
maximum length
of the network cable for power supply over an Ethernet cable
is
100 m
.
Make sure that you only use switches or routers that support the 10/100 Mbps network
interface of the camera.
We highly recommend using uninterruptible power supplies (UPS) to provide backup
power.
If you are using IEEE 802.3af or IEEE 802.3at (PoE+) Power-over-Ethernet network
components to supply power to MOBOTIX cameras, make sure, if possible, that these
components do not have a fan. Since the power consumption of MOBOTIX cameras is
very low compared to other products, the reliability of the entire system is increased,
thus extending the life of these components.
Caution
Appliances with a maximum total power consumption of 3 W may be connected to
the MxBus connector
and
USB connector
if power is supplied to the camera using
PoE class 3
. If
PoE Class 2
is used,
the power consumption of all the connected
appliances should not exceed 1 W!
For information on changing the PoE class, see Section 2.9.8, «Variable PoE».
2.9.2 Connecting the Q26 to the Network Using a Patch Cable
Using a patch cable and an MX-Overvoltage-Protection-Box or MX-NPA-Box oers the fol-
lowing advantages:
Quick installation/deinstallation
No shortening of cable even when installing/deinstalling several times
Hose-proof/dust-proof connection in accordance with IP65
Additional protection against overvoltages of up to 4 kV when using the
MX-Overvoltage-Protection-Box
Connection of additional
devices with more than
1 W (via MxBus/USB):
Max. ambient tempera-
ture +50°C /+122°F

Table of Contents

Other manuals for Mobotix Q26

Related product manuals