48
Q26 Camera Manual: Product Overview
Using as a Stand (with/without tripod)
Using this stand, you can now place the camera upright on a at
surface or mount the whole assembly on a tripod (1/4” tripod thread
at the bottom of the stand).
1.4.8 MiniUSB Cable to MiniUSB (Angled/Straight)
Order no.: MX-CBL-MU-EN-STR-05/2/5 (angled/straight)
MOBOTIX add-on modules (MX-232-IO-Box, ExtIO, CamIO)
can be connected directly to the Q26 with this cable, which
is up to ve meters long.
1.4.9 MiniUSB Cable to MiniUSB (Angled/Angled)
Order no.: MX-CBL-MU-EN-EN-PG-05/2/5
(angled/angled)
The MOBOTIX ExtIO can be connected directly to the Q26
with this cable, which is up to ve meters long.
1.4.10 MiniUSB Cable to USB-A Socket
Order no.: MX-CBL-MU-EN-AB-05/2/5
USB-based storage media (for example, USB hard drives)
can be connected directly to the Q26 with this cable, which
is up to ve meters long.
1.4.11 Ethernet Patch Cable for Bayonet Catch
Order no.: MX-OPT-CBL-LAN-1/2/5/10
(length: 1 m/2 m/5 m/10 m)
The MOBOTIX-developed special cable can be installed in
a waterproof manner and has an integrated sealing gasket.
Every Q26 ships with a 0.5-m-long cable as standard, which
can be exchanged for a patch cable up to 10 m in length.
Only cables with
angled plugs can be
used for the Q26
To Next Page
Loading...
