100
Q26 Camera Manual: Installation
2.8.2 Inserting a MicroSD Card
1. Insert the MicroSD card: Push the MicroSD card into the
card slot as shown, until an audible and perceptible click
indicates it is in place.
2.
Mount the back plate: Replace the back plate of the cam-
era housing, ensuring that the back plate screw holes are
correctly positioned above the thread inserts.
3. Screw the back plate tight and replace the connection
cables: Place the four Allen screws back into the back
plate and tighten the screws using the supplied 2 mm Allen
wrench. The previously removed patch cable must now
be reconnected (see «Attaching the Cable Retainer» in
Section 2.2.2, «Procedure»).
4.
Attach the outer shell: Replace the outer shell and screw
all four Allen screws tight using the supplied Allen wrench.
5. Activate recording: If you have inserted a MicroSD card
that has already been MxFFS formatted, you can activate
recording under Admin Menu > Storage on External
File Server / Flash Device. Once the camera has been
rebooted, it automatically activates recording.
6. If you have inserted a new MicroSD card, it must rst be formatted as described in
Section 3.4, «MicroSD Card Recording».
Click!
Push-push function:
insert MicroSD card, then
push until it clicks
Bayonet catch closed
To Next Page
Loading...
